The Honda Monkey 50 Concept motorcycle specifications include a 49 cc (2.99 cu in) engine, a 4-speed gearbox, and a listed weight of 68 kg (149.9 lb).
Key specifications
How the Honda Monkey 50 Concept compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 91% lower than the Honda database average. Around the 3rd percentile across Honda models.
About 66% lighter than the Honda database average. Around the 1st percentile across Honda models.
About 15% lower than the Honda database average. Around the 6th percentile across Honda models.
About 59% smaller than the Honda database average. Around the 12th percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
49 cc — larger displacement than about 3% of Honda models.
68 kg — heavier than about 1% of Honda models, or lighter than about 99%.
660 mm — taller than about 6% of Honda models.
5.5 L — larger than about 12% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,365
2,078
34% below average.
600
827
27% below average.
850
1,161
27% below average.
895
1,431
37% below average.
660
780
15% below average.
145
184
21% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 3.50-8 |
|---|---|
| Rear tire size | 3.50-8 |
| Bore/stroke ratio | 0.95:1 (Undersquare) |
Model information
| Year released | 2016 |
|---|---|
| Category | Prototype / concept model |
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 49 cc (2.99 cu in) |
| Torque | 3.4 Nm (0.3 kgf-m or 2.5 ft.lbs) @ 5,000 rpm |
| Bore × stroke | 39.0 x 41.1 mm (1.5 x 1.6 inches) |
| Compression ratio | 10.0:1 |
| Cooling system | Air |
| Fuel system | Injection. PGM-FI |
| Fuel control | Overhead Cams (OHC) |
| Ignition | Full transistor type battery ignition |
| Starter | Kick |
Transmission and drivetrain
| Gearbox | 4-speed |
|---|---|
| Final drive | Chain (final drive) |
| Clutch | Wet, multiplate |
Chassis and suspension
| Front suspension | Telescopic fork |
|---|---|
| Rear suspension | Swing arm |
| Rake | 25.0° |
| Trail | 42 mm (1.7 inches) |
Brakes, wheels and tires
| Front brakes | Expanding brake (drum brake) |
|---|---|
| Rear brakes | Expanding brake (drum brake) |
| Front tire | 3.50-8 |
| Rear tire | 3.50-8 |
Dimensions and weight
| Wet weight | 68 kg (149.9 lb) |
|---|---|
| Seat height | 660 mm (26.0 inches) |
| Overall length | 1,365 mm (53.7 inches) |
| Overall width | 600 mm (23.6 inches) |
| Overall height | 850 mm (33.5 inches) |
| Wheelbase | 895 mm (35.2 inches) |
| Ground clearance | 145 mm (5.7 inches) |
Fuel and emissions
| Fuel capacity | 5.50 L (1.45 US gal) |
|---|
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.