The Honda Gorilla motorcycle specifications include a 50 cc (3.05 cu in) engine, power of 3.1 hp (2.2 kW) @ 7,500 rpm, a 4-speed gearbox, and a listed weight of 67 kg (147.7 lb).
Key specifications
How the Honda Gorilla compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 94% lower than the Honda database average. Around the 1st percentile across Honda models.
About 91% lower than the Honda database average. Around the 4th percentile across Honda models.
About 66% lighter than the Honda database average. Around the 1st percentile across Honda models.
About 33% smaller than the Honda database average. Around the 27th percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
3.1 hp — more powerful than about 1% of Honda models with power data.
50 cc — larger displacement than about 4% of Honda models.
67 kg — heavier than about 1% of Honda models, or lighter than about 99%.
9 L — larger than about 27% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,365
2,078
34% below average.
895
1,431
37% below average.
Mechanical overview
Additional useful specifications
| Power-to-weight ratio | 0.046 hp/kg |
|---|---|
| Power-to-weight | 46.3 hp/tonne |
| Specific power | 62.0 hp/L |
| Bore/stroke ratio | 0.95:1 (Undersquare) |
Model information
| Year released | 2006 |
|---|
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 50 cc (3.05 cu in) |
| Power | 3.1 hp (2.2 kW) @ 7,500 rpm |
| Torque | 3.1 Nm (0.3 kgf-m or 2.3 ft.lbs) @ 6,000 rpm |
| Bore × stroke | 39.0 x 41 mm (1.5 x 1.6 inches) |
| Compression ratio | 10.0:1 |
| Cooling system | Air |
| Fuel system | Carburettor. PB3J |
| Fuel control | Overhead Cams (OHC) |
| Ignition | CDI |
| Starter | Kick |
Transmission and drivetrain
| Gearbox | 4-speed |
|---|---|
| Clutch | Wet veneer coil spring |
Dimensions and weight
| Wet weight | 67 kg (147.7 lb) |
|---|---|
| Dry weight | 62 kg (136.7 lb) |
| Overall length | 1,365 mm (53.7 inches) |
| Wheelbase | 895 mm (35.2 inches) |
Fuel and emissions
| Fuel capacity | 9.00 L (2.38 US gal) |
|---|
Performance
| Power/weight ratio | 0.0497 hp/kg |
|---|
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.