The Harley-Davidson FLHRS Road King Custom motorcycle dimensions for 2006-2007 is length 93.7 in (2,380 mm), wheelbase 63.5 in (1,613 mm), seat height 26.1 in (663 mm) to 27.1 in (688 mm), and the ground clearance is 4.7 in (119 mm).
Harley-Davidson FLHRS Road King Custom dimensions at a glance
Dimension charts
Position within similar Harley-Davidson models
Representative dimensions shown within the observed range for comparable Harley-Davidson models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Harley-Davidson model group.
Specification differences by model year
Only dimensions that actually change between the supplied years are shown below. Unchanged specifications are omitted.
Seat height
Useful dimension ratios
Seat height feel
About 26.6 in — a seat height around the category middle. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
67.8% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 30.2 in (767 mm) combined beyond the axle-to-axle distance.
Clearance / wheelbase
7.4%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Harley-Davidson models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 93.7 in (2,380 mm) | 92.8 in (2,357 mm) | 0.9 in above median |
| Wheelbase | 63.5 in (1,613 mm) | 64.2 in (1,630 mm) | 0.7 in below median |
| Seat height | 26.6 in (676 mm) | 26.7 in (678 mm) | 0.1 in below median |
| Ground clearance | 4.7 in (119 mm) | 4.9 in (125 mm) | 0.2 in below median |
Harley-Davidson FLHRS Road King Custom dimensions FAQ
Is the Harley-Davidson FLHRS Road King Custom seat height low or tall?
The representative seat height is 26.6 in (676 mm), which is a seat height around the category middle. 0.1 in below the category median.
Does the Harley-Davidson FLHRS Road King Custom have a short or long wheelbase?
The representative wheelbase is 63.5 in (1,613 mm), giving the Harley-Davidson FLHRS Road King Custom a shorter-than-typical wheelbase. 0.7 in below the category median. The wheelbase is about 67.8% of overall length.
How much ground clearance does the Harley-Davidson FLHRS Road King Custom have?
The representative ground clearance is 4.7 in (119 mm), which is lower-than-typical ground clearance. 0.2 in below the category median.
Is the Harley-Davidson FLHRS Road King Custom compact or large?
The representative overall length is 93.7 in (2,380 mm), making the Harley-Davidson FLHRS Road King Custom longer than most comparable Harley-Davidson models. 0.9 in above the category median.
Did the Harley-Davidson FLHRS Road King Custom dimensions change much by year?
The biggest supplied shift is in seat height: increased from 26.1 in (663 mm) in 2006 to 27.1 in (688 mm) in 2007, a change of 1 in. Check the year-by-year section above for the full breakdown.
What is the main dimension takeaway for the Harley-Davidson FLHRS Road King Custom?
The main listed figures are overall length 93.7 in (2,380 mm), wheelbase 63.5 in (1,613 mm), seat height 26.6 in (676 mm), and ground clearance 4.7 in (119 mm). Its clearance-to-wheelbase ratio is about 7.4%, which is a simple way to relate ground clearance to the bike’s axle spacing.