The Harley-Davidson Dyna Fat Bob motorcycle dimensions for 2013-2017 is length 91.7 in (2,329 mm) to 94.5 in (2,400 mm), wheelbase 63.8 in (1,621 mm), seat height 26.1 in (663 mm) to 27.8 in (705 mm), and the ground clearance is 4.9 in (124 mm) to 4.9 in (125 mm).
Harley-Davidson Dyna Fat Bob dimensions at a glance
Dimension charts
Position within similar Harley-Davidson models
Representative dimensions shown within the observed range for comparable Harley-Davidson models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Harley-Davidson model group.
Specification differences by model year
Only dimensions that actually change between the supplied years are shown below. Unchanged specifications are omitted.
Overall length
Seat height
Ground clearance
Useful dimension ratios
Seat height feel
About 26.1 in — a lower-than-typical seat height. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
69.6% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 27.9 in (708 mm) combined beyond the axle-to-axle distance.
Clearance / wheelbase
7.6%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Harley-Davidson models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 91.7 in (2,329 mm) | 92.8 in (2,357 mm) | 1.1 in below median |
| Wheelbase | 63.8 in (1,621 mm) | 64.2 in (1,630 mm) | 0.4 in below median |
| Seat height | 26.1 in (663 mm) | 26.7 in (678 mm) | 0.6 in below median |
| Ground clearance | 4.9 in (124 mm) | 4.9 in (125 mm) | 0 in below median |
Harley-Davidson Dyna Fat Bob dimensions FAQ
Is the Harley-Davidson Dyna Fat Bob seat height low or tall?
The representative seat height is 26.1 in (663 mm), which is a lower-than-typical seat height. 0.6 in below the category median.
Does the Harley-Davidson Dyna Fat Bob have a short or long wheelbase?
The representative wheelbase is 63.8 in (1,621 mm), giving the Harley-Davidson Dyna Fat Bob a wheelbase around the category middle. 0.4 in below the category median. The wheelbase is about 69.6% of overall length.
How much ground clearance does the Harley-Davidson Dyna Fat Bob have?
The representative ground clearance is 4.9 in (124 mm), which is ground clearance around the category middle. 0 in below the category median.
Is the Harley-Davidson Dyna Fat Bob compact or large?
The representative overall length is 91.7 in (2,329 mm), making the Harley-Davidson Dyna Fat Bob shorter than most comparable Harley-Davidson models. 1.1 in below the category median.
Did the Harley-Davidson Dyna Fat Bob dimensions change much by year?
The biggest supplied shift is in overall length: increased from 91.7 in (2,329 mm) in 2013-2015 to 94.5 in (2,400 mm) in 2016-2017, a change of 2.8 in. Check the year-by-year section above for the full breakdown.
What is the main dimension takeaway for the Harley-Davidson Dyna Fat Bob?
The main listed figures are overall length 91.7 in (2,329 mm), wheelbase 63.8 in (1,621 mm), seat height 26.1 in (663 mm), and ground clearance 4.9 in (124 mm). Its clearance-to-wheelbase ratio is about 7.6%, which is a simple way to relate ground clearance to the bike’s axle spacing.