The Suzuki Intruder Classic 400 Cast Wheel motorcycle dimensions for 2012-2014 is length 81.9 in (2,080 mm), height 43.5 in (1,105 mm), wheelbase 65.2 in (1,655 mm), seat height 27.6 in (700 mm) to 27.6 in (701 mm), and the ground clearance is 5.5 in (140 mm).
Suzuki Intruder Classic 400 Cast Wheel dimensions at a glance
Dimension charts
Position within similar Suzuki models
Representative dimensions shown within the observed range for comparable Suzuki models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Suzuki model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Seat height
Useful dimension ratios
Seat height feel
About 27.6 in — one of the highest seat heights in its category. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
79.6% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 16.7 in (425 mm) combined beyond the axle-to-axle distance.
Clearance / wheelbase
8.5%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Suzuki models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 81.9 in (2,080 mm) | 94.9 in (2,410 mm) | 13 in below median |
| Height | 43.5 in (1,105 mm) | 44.1 in (1,120 mm) | 0.6 in below median |
| Wheelbase | 65.2 in (1,655 mm) | 65.2 in (1,655 mm) | About the same as median |
| Seat height | 27.6 in (700 mm) | 27.6 in (700 mm) | About the same as median |
| Ground clearance | 5.5 in (140 mm) | 5.5 in (140 mm) | About the same as median |
Suzuki Intruder Classic 400 Cast Wheel dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2012 | 81.9 in (2,080 mm) | — | — | 65.2 in (1,655 mm) | 27.6 in (700 mm) | 5.5 in (140 mm) |
| 2014 | 81.9 in (2,080 mm) | — | 43.5 in (1,105 mm) | 65.2 in (1,655 mm) | 27.6 in (701 mm) | 5.5 in (140 mm) |
Suzuki Intruder Classic 400 Cast Wheel dimensions FAQ
Is the Suzuki Intruder Classic 400 Cast Wheel seat height low or tall?
The representative seat height is 27.6 in (700 mm), which is one of the highest seat heights in its category. About the same as the category median.
Does the Suzuki Intruder Classic 400 Cast Wheel have a short or long wheelbase?
The representative wheelbase is 65.2 in (1,655 mm), giving the Suzuki Intruder Classic 400 Cast Wheel a wheelbase around the category middle. About the same as the category median. The wheelbase is about 79.6% of overall length.
How much ground clearance does the Suzuki Intruder Classic 400 Cast Wheel have?
The representative ground clearance is 5.5 in (140 mm), which is ground clearance around the category middle. About the same as the category median.
Is the Suzuki Intruder Classic 400 Cast Wheel compact or large?
The representative overall length is 81.9 in (2,080 mm), making the Suzuki Intruder Classic 400 Cast Wheel very compact for its category. 13 in below the category median.
Did the Suzuki Intruder Classic 400 Cast Wheel dimensions change much by year?
The biggest supplied shift is in seat height: increased from 27.6 in (700 mm) in 2012 to 27.6 in (701 mm) in 2014, a change of 0 in. Check the year-by-year section above for the full breakdown.
What is the main dimension takeaway for the Suzuki Intruder Classic 400 Cast Wheel?
The main listed figures are overall length 81.9 in (2,080 mm), wheelbase 65.2 in (1,655 mm), seat height 27.6 in (700 mm), and ground clearance 5.5 in (140 mm). Its clearance-to-wheelbase ratio is about 8.5%, which is a simple way to relate ground clearance to the bike’s axle spacing.