The Yamaha DT 50 Enduro motorcycle dimensions for 2006 is length 80.7 in (2,050 mm), width 33.5 in (850 mm), height 45.7 in (1,160 mm), wheelbase 53.1 in (1,350 mm), seat height 34.3 in (870 mm), and the ground clearance is 13.7 in (347 mm).
Yamaha DT 50 Enduro dimensions at a glance
Dimension charts
Position within similar Yamaha models
Representative dimensions shown within the observed range for comparable Yamaha models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Yamaha model group.
Useful dimension ratios
Seat height feel
About 34.3 in — a higher-than-typical seat height. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
65.9% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 27.6 in (700 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 18.8 sq ft (1.74 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
25.7%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Yamaha models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 80.7 in (2,050 mm) | 83.1 in (2,110 mm) | 2.4 in below median |
| Width | 33.5 in (850 mm) | 32.3 in (820 mm) | 1.2 in above median |
| Height | 45.7 in (1,160 mm) | 45.7 in (1,160 mm) | About the same as median |
| Wheelbase | 53.1 in (1,350 mm) | 54.5 in (1,384 mm) | 1.3 in below median |
| Seat height | 34.3 in (870 mm) | 33.7 in (855 mm) | 0.6 in above median |
| Ground clearance | 13.7 in (347 mm) | 10.9 in (278 mm) | 2.7 in above median |
Yamaha DT 50 Enduro dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2006 | 80.7 in (2,050 mm) | 33.5 in (850 mm) | 45.7 in (1,160 mm) | 53.1 in (1,350 mm) | 34.3 in (870 mm) | 13.7 in (347 mm) |
Yamaha DT 50 Enduro dimensions FAQ
Is the Yamaha DT 50 Enduro seat height low or tall?
The representative seat height is 34.3 in (870 mm), which is a higher-than-typical seat height. 0.6 in above the category median.
Does the Yamaha DT 50 Enduro have a short or long wheelbase?
The representative wheelbase is 53.1 in (1,350 mm), giving the Yamaha DT 50 Enduro a wheelbase around the category middle. 1.3 in below the category median. The wheelbase is about 65.9% of overall length.
How much ground clearance does the Yamaha DT 50 Enduro have?
The representative ground clearance is 13.7 in (347 mm), which is among the highest ground-clearance figures in its category. 2.7 in above the category median.
Is the Yamaha DT 50 Enduro compact or large?
The representative overall length is 80.7 in (2,050 mm), making the Yamaha DT 50 Enduro shorter than most comparable Yamaha models. 2.4 in below the category median. Its rough length × width storage footprint is about 18.8 sq ft (1.74 m²).
What do the Yamaha DT 50 Enduro width and height suggest?
Its representative width is 33.5 in (850 mm) and representative height is 45.7 in (1,160 mm). The width is among the widest comparable Yamaha models. The height is around typical category height.
What is the main dimension takeaway for the Yamaha DT 50 Enduro?
The main listed figures are overall length 80.7 in (2,050 mm), wheelbase 53.1 in (1,350 mm), seat height 34.3 in (870 mm), and ground clearance 13.7 in (347 mm). Its clearance-to-wheelbase ratio is about 25.7%, which is a simple way to relate ground clearance to the bike’s axle spacing.