The Honda VTR 1000 SP-2 motorcycle dimensions for 2003-2006 is length 79.7 in (2,025 mm), width 28.5 in (725 mm), wheelbase 55.9 in (1,420 mm), seat height 32.3 in (820 mm) to 32.5 in (825 mm), and the ground clearance is 5.5 in (140 mm).
Honda VTR 1000 SP-2 dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Seat height
Useful dimension ratios
Seat height feel
About 32.4 in — one of the highest seat heights in its category. This is a geometry comparison, not a guarantee of rider fit.
Bounding-box footprint
About 15.8 sq ft (1.47 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
9.9%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 79.7 in (2,025 mm) | 81.7 in (2,074 mm) | 1.9 in below median |
| Width | 28.5 in (725 mm) | 29.5 in (750 mm) | 1 in below median |
| Wheelbase | 55.9 in (1,420 mm) | 55.3 in (1,405 mm) | 0.6 in above median |
| Seat height | 32.4 in (822 mm) | 31.7 in (805 mm) | 0.7 in above median |
| Ground clearance | 5.5 in (140 mm) | 5.4 in (136 mm) | 0.2 in above median |
Honda VTR 1000 SP-2 dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2003 | 79.7 in (2,025 mm) | 28.5 in (725 mm) | — | — | 32.3 in (820 mm) | — |
| 2006 | — | — | — | 55.9 in (1,420 mm) | 32.5 in (825 mm) | 5.5 in (140 mm) |
Honda VTR 1000 SP-2 dimensions FAQ
Is the Honda VTR 1000 SP-2 seat height low or tall?
The representative seat height is 32.4 in (822 mm), which is one of the highest seat heights in its category. 0.7 in above the category median.
Does the Honda VTR 1000 SP-2 have a short or long wheelbase?
The representative wheelbase is 55.9 in (1,420 mm), giving the Honda VTR 1000 SP-2 a longer-than-typical wheelbase. 0.6 in above the category median.
How much ground clearance does the Honda VTR 1000 SP-2 have?
The representative ground clearance is 5.5 in (140 mm), which is ground clearance around the category middle. 0.2 in above the category median.
Is the Honda VTR 1000 SP-2 compact or large?
The representative overall length is 79.7 in (2,025 mm), making the Honda VTR 1000 SP-2 shorter than most comparable Honda models. 1.9 in below the category median. Its rough length × width storage footprint is about 15.8 sq ft (1.47 m²).
Did the Honda VTR 1000 SP-2 dimensions change much by year?
The biggest supplied shift is in seat height: increased from 32.3 in (820 mm) in 2003 to 32.5 in (825 mm) in 2006, a change of 0.2 in. Check the year-by-year section above for the full breakdown.
What is the main dimension takeaway for the Honda VTR 1000 SP-2?
The main listed figures are overall length 79.7 in (2,025 mm), wheelbase 55.9 in (1,420 mm), seat height 32.4 in (822 mm), and ground clearance 5.5 in (140 mm). Its clearance-to-wheelbase ratio is about 9.9%, which is a simple way to relate ground clearance to the bike’s axle spacing.