The Honda VT 250F Interga motorcycle dimensions for 1982-1985 is length 78.7 in (2,000 mm) to 79.8 in (2,028 mm), width 28.7 in (730 mm) to 29.5 in (750 mm), height 46.3 in (1,175 mm) to 46.7 in (1,185 mm), wheelbase 54.5 in (1,385 mm), and the seat height 30.7 in (780 mm).
Honda VT 250F Interga dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Overall length
Overall width
Overall height
Useful dimension ratios
Seat height feel
About 30.7 in — a seat height around the category middle. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
68.3% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 25.3 in (643 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 16 sq ft (1.49 m²), calculated from listed overall length × width. Useful for rough storage planning.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 79.3 in (2,014 mm) | 80.7 in (2,050 mm) | 1.4 in below median |
| Width | 29.1 in (740 mm) | 30.4 in (772 mm) | 1.3 in below median |
| Height | 46.5 in (1,180 mm) | 43.7 in (1,110 mm) | 2.8 in above median |
| Wheelbase | 54.5 in (1,385 mm) | 54.2 in (1,378 mm) | 0.3 in above median |
| Seat height | 30.7 in (780 mm) | 30.7 in (780 mm) | About the same as median |
Honda VT 250F Interga dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 1982 | 78.7 in (2,000 mm) | 29.5 in (750 mm) | 46.3 in (1,175 mm) | — | 30.7 in (780 mm) | — |
| 1985 | 79.8 in (2,028 mm) | 28.7 in (730 mm) | 46.7 in (1,185 mm) | 54.5 in (1,385 mm) | — | — |
Honda VT 250F Interga dimensions FAQ
Is the Honda VT 250F Interga seat height low or tall?
The representative seat height is 30.7 in (780 mm), which is a seat height around the category middle. About the same as the category median.
Does the Honda VT 250F Interga have a short or long wheelbase?
The representative wheelbase is 54.5 in (1,385 mm), giving the Honda VT 250F Interga a wheelbase around the category middle. 0.3 in above the category median. The wheelbase is about 68.3% of overall length.
Is the Honda VT 250F Interga compact or large?
The representative overall length is 79.3 in (2,014 mm), making the Honda VT 250F Interga shorter than most comparable Honda models. 1.4 in below the category median. Its rough length × width storage footprint is about 16 sq ft (1.49 m²).
What do the Honda VT 250F Interga width and height suggest?
Its representative width is 29.1 in (740 mm) and representative height is 46.5 in (1,180 mm). The width is very narrow for its category. The height is among the tallest comparable Honda models.
Did the Honda VT 250F Interga dimensions change much by year?
The biggest supplied shift is in overall length: increased from 78.7 in (2,000 mm) in 1982 to 79.8 in (2,028 mm) in 1985, a change of 1.1 in. Check the year-by-year section above for the full breakdown.