Across the 2019, 2020 and 2021 model years, the Kawasaki Vulcan S SE motorcycle has a listed wet/running weight of 498.2 lb (226 kg).
Kawasaki Vulcan S SE weight overview
This is firmly on the heavier side. The real penalty is not necessarily normal riding; it is low-speed work, awkward parking and moving the bike around manually.
Heavy Motorcycle
How heavy is the Kawasaki Vulcan S SE?
wet weight
Using a model-level wet weight comparison, the Kawasaki Vulcan S SE is heavier than about 63.5% of 144 Kawasaki motorcycles with compatible weight data.
Ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Kawasaki Vulcan S SE weight & related specs
| Model years covered | 2019, 2020, 2021 |
|---|---|
| Wet / running weight | 498.2 lb (226 kg) |
| Engine displacement | 649 cc |
| Torque | 39.1 lb-ft (53 Nm) |
| Fuel capacity | 3.7 US gal (14 L) |
| Full-tank fuel weight (estimated) | 23 lb (10.4 kg) |
Weight changes by model year
Useful weight calculations
| Torque per 100 lb | 7.85 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 1.3 cc / lb |
| Weight per 100 cc | 76.8 lb / 100 cc |
| Fuel weight as % of bike weight | 4.6% |
What the weight numbers tell you
Kawasaki Vulcan S SE weight FAQ
How heavy is the Kawasaki Vulcan S SE ready to ride?
Listed ready-to-ride weight is 498.2 lb (226 kg). The year-specific section above shows which years use each figure where the supplied value changes.
Is the Kawasaki Vulcan S SE heavy compared with other Kawasaki motorcycles?
It sits fairly close to the middle of the category. Its representative wet weight is around the 64th percentile among 144 compatible Kawasaki motorcycles.
Does the Kawasaki Vulcan S SE weight change by model year?
Not in the usable weight data on this page. Across the covered 2019-2021 years, the supplied weight figure remains the same where comparable values are available.
How much does the Kawasaki Vulcan S SE fuel weigh?
The listed tank capacity is 3.7 US gal (14 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 23 lb (10.4 kg). That is an estimate for fuel mass, not an official Kawasaki curb-weight calculation.
How heavy is the Kawasaki Vulcan S SE with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 678.2 lb (307.6 kg) using the representative wet/running figure. Gear and luggage would add more.
What is the Kawasaki Vulcan S SE torque per 100 lb of bike weight?
The calculated torque-to-weight range is 7.85 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
How many cc does the Kawasaki Vulcan S SE have per pound?
Engine displacement relative to bike weight is 1.3 cc per lb. It can help compare motorcycles from very different displacement classes without relying on cc alone.
How does the Kawasaki Vulcan S SE compare with the median Kawasaki motorcycle weight?
The model sits about 34.7 lb (15.8 kg) heavier than the compatible median Kawasaki motorcycle weight used on this page.
Will the Kawasaki Vulcan S SE feel heavy at low speed?
It is heavy enough that smart parking matters. Avoid situations where you have to paddle it backward uphill or catch it after it leans too far.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Kawasaki website.