Kawasaki Brute Force 300 Weight (536lb)

Quick answer

Across 12 covered model years from 2012 to 2025, the Kawasaki Brute Force 300 motorcycle has supplied wet/running weights ranging from 533.5 lb (242 kg) to 535.7 lb (243 kg).

Wet / running weight533.5 lb (242 kg) to 535.7 lb (243 kg)
Fuel capacity3.17 US gal (12 L) to 3.2 US gal (12.11 L)
Full tank fuel weight19.7 lb (8.9 kg) to 19.9 lb (9 kg)
Power / 100 lb4.01 hp / 100 lb to 4.12 hp / 100 lb
Model years covered
201220132014201520162017201820202021202220232025

Kawasaki Brute Force 300 weight overview

WHAT THIS MEANS

This is a substantial motorcycle. The weight matters most when stopped, backing it up, parking on a slope or recovering from a lean.

Heavy Motorcycle

CATEGORY WEIGHT POSITION

How heavy is the Kawasaki Brute Force 300?

wet weight

Using a model-level wet weight comparison, the Kawasaki Brute Force 300 is heavier than about 72.9% of 144 Kawasaki motorcycles with compatible weight data.

LighterTypicalHeavier
535.7 lb (243 kg)
144 Kawasaki motorcyclesMedian: 463.5 lb (210.2 kg)
WEIGHT VISUAL

Ready-to-ride weight range

Wet / running weight533.5 lb (242 kg) – 535.7 lb (243 kg)
REAL-WORLD LOAD

Bike + rider total weight

These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.

150 lb rider685.7 lb (311 kg)bike + rider • bike is 78.1% of total mass
180 lb rider715.7 lb (324.6 kg)bike + rider • bike is 74.9% of total mass
210 lb rider745.7 lb (338.3 kg)bike + rider • bike is 71.8% of total mass

Kawasaki Brute Force 300 weight & related specs

Model years covered 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2020, 2021, 2022, 2023, 2025
Wet / running weight 533.5 lb (242 kg) to 535.7 lb (243 kg)
Engine displacement 271 cc
Power 21.5 hp to 22 hp
Torque 15.9 lb-ft (21.6 Nm) to 16.4 lb-ft (22.3 Nm)
Fuel capacity 3.17 US gal (12 L) to 3.2 US gal (12.11 L)
Full-tank fuel weight (estimated) 19.7 lb (8.9 kg) to 19.9 lb (9 kg)

Weight changes by model year

The 2012 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.

Wet / running weight
2016-2020533.5 lb (242 kg)
Fuel capacity
2020-20233.17 US gal (12 L)
Full-tank fuel weight
2020-202319.7 lb (8.9 kg)
Power
202321.5 hp
Torque
202116.2 lb-ft (22 Nm)
2022-202315.9 lb-ft (21.6 Nm)
Power per 100 lb
20234.01 hp / 100 lb

Useful weight calculations

Horsepower per 100 lb 4.01 hp / 100 lb to 4.12 hp / 100 lb
Pounds per horsepower 24.25 lb / hp to 24.92 lb / hp
Torque per 100 lb 2.97 lb-ft / 100 lb to 3.08 lb-ft / 100 lb
Displacement per pound 0.51 cc / lb
Weight per 100 cc 196.9 lb / 100 cc to 197.7 lb / 100 cc
Fuel weight as % of bike weight 3.7% to 3.7%

What the weight numbers tell you

Using a model-level wet weight comparison, the Kawasaki Brute Force 300 is heavier than about 72.9% of 144 Kawasaki motorcycles with compatible weight data.
A full tank is not weightless: the 3.17 US gal (12 L) to 3.2 US gal (12.11 L) listed capacity works out to approximately 19.7 lb (8.9 kg) to 19.9 lb (9 kg) of gasoline. This is an estimate rather than a Kawasaki curb-weight specification.
Weight is not identical across every model year in this page. Use the year-specific section rather than assuming one figure applies to every Brute Force 300.
The calculated power-to-weight figure is 4.01 hp per 100 lb to 4.12 hp per 100 lb across years with compatible data. It shows how much engine output is available relative to the bike’s mass.

Kawasaki Brute Force 300 weight FAQ

How much does the Kawasaki Brute Force 300 weigh?

The available wet/running figure is 533.5 lb (242 kg) to 535.7 lb (243 kg). This is more representative of the motorcycle you actually push, park and ride than a dry-only specification.

How does the Kawasaki Brute Force 300 weight compare with similar Kawasakis?

It is on the heavier side. Its representative wet weight is around the 73rd percentile among 144 compatible Kawasaki motorcycles.

Are all Kawasaki Brute Force 300 model years the same weight?

There are year-to-year differences in the supplied data. The earliest covered year is used as the baseline, with later changed values shown separately above.

What does a full tank of gas weigh on the Kawasaki Brute Force 300?

A full tank works out to about 19.7 lb (8.9 kg) to 19.9 lb (9 kg) from the listed 3.17 US gal (12 L) to 3.2 US gal (12.11 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.

What does the Kawasaki Brute Force 300 weigh with a 180 lb rider?

The approximate combined total is 715.7 lb (324.6 kg) with a 180 lb rider, based on the representative wet/running weight used on this page.

Is the Kawasaki Brute Force 300 strong for its weight?

The calculated range is 4.01 hp per 100 lb to 4.12 hp per 100 lb. This ratio is usually more informative for acceleration comparisons than horsepower alone. That places it around the 21st percentile within the compatible Kawasaki motorcycles power-to-weight comparison.

What is the Kawasaki Brute Force 300 torque per 100 lb of bike weight?

Available data gives 2.97 lb-ft per 100 lb to 3.08 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.

How many cc does the Kawasaki Brute Force 300 have per pound?

The model has about 0.51 cc per lb in the available data. This simply shows how much engine displacement there is for each pound of motorcycle weight.

How does the Kawasaki Brute Force 300 compare with the median Kawasaki motorcycle weight?

The representative wet weight is about 72.2 lb (32.8 kg) heavier than the median Kawasaki motorcycle weight of 463.5 lb (210.2 kg) in this dataset.

Official information note

Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Kawasaki website.