For the 1995 model year, the Harley-Davidson 1340 Dyna Convertible motorcycle has a listed dry weight of 621.7 lb (282 kg).
Harley-Davidson 1340 Dyna Convertible weight overview
The scale number is high enough that parking and low-speed balance deserve real consideration. Once the bike leans too far, recovering it takes much more effort than on a light machine. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Heavy Motorcycle
How heavy is the Harley-Davidson 1340 Dyna Convertible?
dry weight
Using a model-level dry weight comparison, the Harley-Davidson 1340 Dyna Convertible is lighter than about 55.6% of 45 Harley-Davidson motorcycles with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Harley-Davidson 1340 Dyna Convertible weight & related specs
| Model years covered | 1995 |
|---|---|
| Dry weight | 621.7 lb (282 kg) |
| Engine displacement | 1,338 cc |
| Torque | 63.7 lb-ft (86.3 Nm) |
Useful weight calculations
| Torque per 100 lb | 10.24 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 2.15 cc / lb |
| Weight per 100 cc | 46.5 lb / 100 cc |
What the weight numbers tell you
Harley-Davidson 1340 Dyna Convertible weight FAQ
What is the Harley-Davidson 1340 Dyna Convertible dry weight?
The available dry weight is 621.7 lb (282 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.
Is the Harley-Davidson 1340 Dyna Convertible lighter or heavier than other Harley-Davidson motorcycles?
Weight is broadly typical for the category, landing around the 44th percentile in this model-level Harley-Davidson comparison.
What is the combined Harley-Davidson 1340 Dyna Convertible and rider weight?
Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 801.7 lb (363.6 kg) before riding gear, luggage or a passenger.
Is the listed Harley-Davidson 1340 Dyna Convertible weight ready to ride?
No. Dry weight excludes at least some operating fluids, so the actual ready-to-ride motorcycle will weigh more.
What is the Harley-Davidson 1340 Dyna Convertible torque-to-weight ratio?
Where compatible torque and weight figures are available, the model works out to 10.24 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
How large is the Harley-Davidson 1340 Dyna Convertible engine for its weight?
The available figures work out to 2.15 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
Is the Harley-Davidson 1340 Dyna Convertible above or below the typical Harley-Davidson motorcycle weight?
Compared with the median Harley-Davidson motorcycle weight of 632.7 lb (287 kg), the model is roughly 11 lb (5 kg) lighter.
Where will I notice the Harley-Davidson 1340 Dyna Convertible weight most?
The main challenge is low-speed and stationary handling. Once moving the chassis may disguise the mass, but backing up or holding it on a slope still means managing the full weight.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Harley-Davidson website.