Across the 1996 and 2001 model years, the Honda ST 1100 Pan-European motorcycle has supplied wet/running weights ranging from 716.5 lb (325 kg) and dry weights ranging from 632.7 lb (287 kg) to 654.8 lb (297 kg), depending on model year.
Honda ST 1100 Pan-European weight overview
This sits in heavyweight territory. Riders should think about garage movement, backing up, surface slope and passenger/luggage load as much as the on-road feel.
Very Heavy Motorcycle
How heavy is the Honda ST 1100 Pan-European?
wet weight
Using a model-level wet weight comparison, the Honda ST 1100 Pan-European is heavier than about 54.3% of 47 Honda touring motorcycles with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Honda ST 1100 Pan-European weight & related specs
| Model years covered | 1996, 2001 |
|---|---|
| Wet / running weight | 716.5 lb (325 kg) |
| Dry weight | 632.7 lb (287 kg) to 654.8 lb (297 kg) |
| Engine displacement | 1,084 cc to 1,085 cc |
| Power | 98 hp |
| Torque | 80.4 lb-ft (109 Nm) to 81.7 lb-ft (110.8 Nm) |
| Fuel capacity | 7.4 US gal (28 L) |
| Full-tank fuel weight (estimated) | 46 lb (20.9 kg) |
Weight changes by model year
The 1996 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.
Useful weight calculations
| Horsepower per 100 lb | 13.68 hp / 100 lb |
|---|---|
| Pounds per horsepower | 7.31 lb / hp |
| Torque per 100 lb | 11.22 lb-ft / 100 lb to 12.92 lb-ft / 100 lb |
| Displacement per pound | 1.51 cc / lb to 1.71 cc / lb |
| Weight per 100 cc | 58.4 lb / 100 cc to 66 lb / 100 cc |
| Fuel weight as % of bike weight | 6.4% |
| Weight with full tank | 700.8 lb (317.9 kg) |
What the weight numbers tell you
Honda ST 1100 Pan-European weight FAQ
What does the Honda ST 1100 Pan-European weigh ready to ride?
The supplied figures span 716.5 lb (325 kg) for wet/running weight and 632.7 lb (287 kg) to 654.8 lb (297 kg) for dry weight across the years in this page. Wet weight is the better guide to what you actually manage on the road.
Is the Honda ST 1100 Pan-European heavy compared with other Honda touring motorcycles?
It sits fairly close to the middle of the category. Its representative wet weight is around the 54th percentile among 47 compatible Honda touring motorcycles.
Does the Honda ST 1100 Pan-European weight change by model year?
Not every covered year uses the same figure. The page groups identical values together and lists the later model years where the supplied weight specification changes.
How much does the Honda ST 1100 Pan-European fuel weigh?
The listed tank capacity is 7.4 US gal (28 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 46 lb (20.9 kg). That is an estimate for fuel mass, not an official Honda curb-weight calculation.
How heavy is the Honda ST 1100 Pan-European with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 896.5 lb (406.6 kg) using the representative wet/running figure. Gear and luggage would add more.
How much horsepower does the Honda ST 1100 Pan-European have per 100 lb?
Where compatible power and weight figures are available, it works out to 13.68 hp per 100 lb. That places it around the 58th percentile within the compatible Honda touring power-to-weight comparison.
What is the estimated Honda ST 1100 Pan-European weight with a full tank of gas?
Using the listed dry weight plus the calculated fuel mass, the estimated weight with a full tank is 700.8 lb (317.9 kg). That still may not equal official curb weight because dry-weight definitions can exclude other fluids or equipment.
What is the Honda ST 1100 Pan-European dry-to-wet weight difference?
The supplied model-year data shows roughly 61.7 lb (28 kg) between dry and wet/running weight. The exact gap can vary by year and by the manufacturer’s weight definition.
What is the Honda ST 1100 Pan-European torque per 100 lb of bike weight?
The calculated torque-to-weight range is 11.22 lb-ft per 100 lb to 12.92 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.