For the 2013 model year, the Honda NSC110 Vision motorcycle has a listed dry weight of 224.9 lb (102 kg).
Honda NSC110 Vision weight overview
Its low overall mass should be most noticeable off the throttle: moving it by hand, backing out of a parking space and managing stop-start riding should take less effort than on a heavy road bike. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Light Motorcycle
How heavy is the Honda NSC110 Vision?
dry weight
Using a model-level dry weight comparison, the Honda NSC110 Vision is lighter than about 69.3% of 70 Honda scooters with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Honda NSC110 Vision weight & related specs
| Model years covered | 2013 |
|---|---|
| Dry weight | 224.9 lb (102 kg) |
| Engine displacement | 108 cc |
| Power | 8.3 hp |
| Torque | 6.4 lb-ft (8.7 Nm) |
| Fuel capacity | 1.45 US gal (5.5 L) |
| Full-tank fuel weight (estimated) | 9 lb (4.1 kg) |
Useful weight calculations
| Horsepower per 100 lb | 3.69 hp / 100 lb |
|---|---|
| Pounds per horsepower | 27.09 lb / hp |
| Torque per 100 lb | 2.85 lb-ft / 100 lb |
| Displacement per pound | 0.48 cc / lb |
| Weight per 100 cc | 208.2 lb / 100 cc |
| Fuel weight as % of bike weight | 4% |
| Weight with full tank | 233.9 lb (106.1 kg) |
What the weight numbers tell you
Honda NSC110 Vision weight FAQ
What is the Honda NSC110 Vision dry weight?
The available dry weight is 224.9 lb (102 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.
Is the Honda NSC110 Vision lighter or heavier than other Honda scooters?
It is comparatively light for this Honda category. The model lands near the 31st percentile for weight in the compatible dataset.
How much does a full tank add to the Honda NSC110 Vision?
Based on the supplied 1.45 US gal (5.5 L) tank capacity, the gasoline itself weighs about 9 lb (4.1 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Honda NSC110 Vision and rider weight?
Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 404.9 lb (183.6 kg) before riding gear, luggage or a passenger.
What is the Honda NSC110 Vision power-to-weight ratio?
Available model-year data produces 3.69 hp per 100 lb. It shows engine output relative to motorcycle mass rather than just quoting peak horsepower. That places it around the 37th percentile within the compatible Honda scooter power-to-weight comparison.
Is the listed Honda NSC110 Vision weight ready to ride?
The published usable figure is dry, not curb weight. A simple dry-plus-full-fuel estimate is 233.9 lb (106.1 kg), but that still is not a substitute for an official wet/curb specification.
What is the estimated Honda NSC110 Vision weight with a full tank of gas?
Based on the available dry-weight and tank-capacity data, a full-tank estimate is 233.9 lb (106.1 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.
How much torque does the Honda NSC110 Vision have per 100 lb?
Where compatible torque and weight figures are available, the model works out to 2.85 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
What is the Honda NSC110 Vision displacement per pound?
The available figures work out to 0.48 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.